ModelBase daily news
Moderators: MR.D, Moderators
ModelBase daily news
This thread contains news about model changes in ModelBase - posts once per day if something happens.
For general discussion about the system go here
For general discussion about the system go here
Last edited by ModelBase on 02 Jun 2009, 03:08, edited 1 time in total.
Daily news 5/7/2009 12:00:00 AM

[5/7/2009 3:13:39 AM] maackey updated model maackey's advradar
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's apollo
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's can
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's mbot
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.

[5/7/2009 3:13:39 AM] maackey updated model maackey's misc
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's plane
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's radar
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's spider
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/7/2009 3:13:39 AM] maackey updated model maackey's storm
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
Daily news 5/8/2009 12:00:00 AM

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Albatross
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's bellbutt
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Brawler
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's CylinderBot
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's HLT
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Lotus
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Marshmellow
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Missiletower
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's panther
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Rapier
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Zeus
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/9/2009 12:00:00 AM

[5/9/2009 2:02:49 AM] PressureLine added model PressureLine's mc2_uller
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 2:25:47 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
[5/9/2009 2:31:10 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:23 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] PressureLine updated model PressureLine's mc2_uller
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:35 AM] maackey updated model maackey's advradar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's advradar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:20 AM] maackey updated model maackey's advradar
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's advradar
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:36 AM] maackey updated model maackey's apollo
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's apollo
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:20 AM] maackey updated model maackey's apollo
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's apollo
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:36 AM] maackey updated model maackey's can
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's can
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's can
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's can
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:36 AM] maackey updated model maackey's mbot
[5/9/2009 2:31:10 AM] maackey updated model maackey's mbot
[5/9/2009 9:31:21 AM] maackey updated model maackey's mbot
[5/9/2009 12:06:41 PM] maackey updated model maackey's mbot

[5/9/2009 2:26:36 AM] maackey updated model maackey's misc
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's misc
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's misc
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's misc
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:36 AM] maackey updated model maackey's plane
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's plane
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's plane
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's plane
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:37 AM] maackey updated model maackey's radar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's radar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's radar
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's radar
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:37 AM] maackey updated model maackey's spider
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's spider
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's spider
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's spider
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:26:37 AM] maackey updated model maackey's storm
[5/9/2009 2:31:10 AM] maackey updated model maackey's storm
[5/9/2009 9:31:22 AM] maackey updated model maackey's storm
[5/9/2009 12:06:41 PM] maackey updated model maackey's storm

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Albatross
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:54 AM] MidKnight updated model MidKnight's Albatross
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Albatross
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's bellbutt
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:54 AM] MidKnight updated model MidKnight's bellbutt
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's bellbutt
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Brawler
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's Brawler
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Brawler
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's CylinderBot
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's CylinderBot
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's CylinderBot
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's HLT
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's HLT
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's HLT
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Lotus
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's Lotus
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Lotus
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Marshmellow
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Marshmellow
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Marshmellow
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Missiletower
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Missiletower
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Missiletower
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's panther
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's panther
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's panther
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Rapier
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Rapier
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Rapier
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Zeus
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Zeus
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Zeus
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 4:21:24 AM] PressureLine added model PressureLine's mc2_aerospotter
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 4:25:41 AM] PressureLine updated model PressureLine's mc2_aerospotter
PressureLine: Added a folder remotely
[5/9/2009 9:31:23 AM] PressureLine updated model PressureLine's mc2_aerospotter
[5/9/2009 12:06:41 PM] PressureLine updated model PressureLine's mc2_aerospotter
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser

[5/9/2009 12:06:40 PM] KingRaptor added model KingRaptor's armhawk2
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's armhawk2
KingRaptor: Removed some wonky Cavedogisms from my scripts.

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's ichthyosaur
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 12:16:55 PM] KingRaptor updated model KingRaptor's ichthyosaur
KingRaptor: Ichthyosaur icon
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's ichthyosaur
KingRaptor: Removed some wonky Cavedogisms from my scripts.

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's mantisshrimp
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's peeper
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's peeper
KingRaptor: Removed some wonky Cavedogisms from my scripts.

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's shadow
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's shadow
KingRaptor: Removed some wonky Cavedogisms from my scripts.

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's sharpshooter
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's siren
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's siren
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
Daily news 5/10/2009 12:00:00 AM

[5/10/2009 8:00:15 PM] 3dmodeler added model 3dmodeler's corevamp models
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/11/2009 12:00:00 AM

[5/11/2009 6:19:12 AM] PressureLine added model PressureLine's angletank
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/12/2009 12:00:00 AM

[5/12/2009 2:17:57 AM] Bumblebee added model Bumblebee's Pyro
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/12/2009 2:17:57 AM] Bumblebee added model Bumblebee's Zeus
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/12/2009 3:19:01 AM] maackey updated model maackey's can
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

[5/12/2009 3:19:01 AM] maackey updated model maackey's mbot
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

[5/12/2009 3:19:01 AM] maackey updated model maackey's misc
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

[5/12/2009 3:19:01 AM] maackey updated model maackey's plane
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

[5/12/2009 3:19:01 AM] maackey updated model maackey's radar
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

[5/12/2009 3:19:01 AM] maackey updated model maackey's storm
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

[5/12/2009 3:40:00 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
[5/12/2009 3:50:26 AM] 3dmodeler updated model 3dmodeler's corevamp models
[5/12/2009 4:41:57 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.

[5/12/2009 5:50:31 AM] PressureLine added model PressureLine's landfactory
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/12/2009 7:54:57 AM] PressureLine updated model PressureLine's landfactory
PressureLine: Removed file/folder
Daily news 5/13/2009 12:00:00 AM

[5/13/2009 2:53:13 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely

[5/13/2009 12:57:30 PM] PressureLine added model PressureLine's armored_car
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGBuggy
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGECM
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGHeavyTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGHeli
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGInfantryTransporter
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGLRRA
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGMediumTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGMissileTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's NGViper
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/13/2009 9:34:01 PM] Daan added model Daan's FIDO
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/13/2009 9:49:13 PM] Daan updated model Daan's FIDO

[5/13/2009 9:49:13 PM] Daan added model Daan's VITO
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/14/2009 12:00:00 AM

[5/14/2009 4:20:20 AM] MidKnight updated model MidKnight's bellbutt
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
Daily news 5/15/2009 12:00:00 AM

[5/15/2009 2:07:02 AM] PressureLine added model PressureLine's contruck
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/15/2009 2:10:58 AM] PressureLine updated model PressureLine's contruck
PressureLine: Removed extra screenshot from contruck folder.

[5/15/2009 8:39:00 PM] scifi added model scifi's rapier-WIP
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/16/2009 12:00:00 AM

[5/16/2009 10:28:06 AM] scifi added model scifi's hawnk-WIP
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 4:51:57 PM] scifi updated model scifi's hawnk-WIP

[5/16/2009 2:26:14 PM] Daan updated model Daan's FIDO
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!

[5/16/2009 2:26:14 PM] Daan added model Daan's Mark4
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/16/2009 2:26:14 PM] Daan added model Daan's Springraces
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 2:41:55 PM] Daan updated model Daan's Springraces

[5/16/2009 2:26:14 PM] Daan added model Daan's Urban assault
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 2:41:55 PM] Daan updated model Daan's Urban assault

[5/16/2009 2:26:14 PM] Daan updated model Daan's VITO
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!

[5/16/2009 4:51:57 PM] scifi updated model scifi's rapier-WIP
Daily news 5/17/2009 12:00:00 AM

[5/17/2009 6:36:55 AM] PressureLine added model PressureLine's scoutcar
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/17/2009 7:06:25 AM] KingRaptor added model KingRaptor's selene
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/21/2009 12:00:00 AM

[5/21/2009 6:19:30 AM] PressureLine added model PressureLine's attackcar
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/28/2009 12:00:00 AM

[5/28/2009 9:13:42 PM] maackey added model maackey's heavy
maackey: Added another robot wip, changed some other minor stuff
[5/28/2009 9:33:46 PM] maackey updated model maackey's heavy
maackey: oops, forgot icons for both the heavy and the storm

[5/28/2009 9:13:42 PM] maackey updated model maackey's misc
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added

[5/28/2009 9:13:42 PM] maackey updated model maackey's plane
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added

[5/28/2009 9:13:42 PM] maackey updated model maackey's storm
maackey: Added another robot wip, changed some other minor stuff
[5/28/2009 9:33:46 PM] maackey updated model maackey's storm
maackey: oops, forgot icons for both the heavy and the storm
Daily news 5/29/2009 12:00:00 AM

[5/29/2009 8:00:14 AM] maackey updated model maackey's can
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added

[5/29/2009 8:00:14 AM] maackey updated model maackey's heavy
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm

[5/29/2009 8:00:14 AM] maackey updated model maackey's storm
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm

[5/29/2009 10:16:07 PM] LordMuffe added model LordMuffe's NGflafreg
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 5/30/2009 12:00:00 AM

[5/30/2009 12:54:36 PM] PressureLine added model PressureLine's trifighter
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[5/30/2009 7:00:15 PM] maackey updated model maackey's heavy
maackey: thud
Daily news 5/31/2009 12:00:00 AM

[5/31/2009 3:53:45 AM] Lisa added model Lisa's mta
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/31/2009 4:15:08 AM] Lisa updated model Lisa's mta
Daily news 6/1/2009 12:00:00 AM

[6/1/2009 8:00:14 AM] Lisa added model Lisa's skeleton
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/1/2009 9:00:13 AM] Lisa updated model Lisa's skeleton

[6/1/2009 1:29:18 PM] PressureLine added model PressureLine's hammerhead
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 6/2/2009 12:00:00 AM

[6/2/2009 4:00:14 AM] Lisa updated model Lisa's skeleton
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
[6/2/2009 5:00:13 AM] Lisa updated model Lisa's skeleton
[6/2/2009 8:00:14 AM] Lisa updated model Lisa's skeleton
[6/2/2009 5:47:37 PM] Lisa updated model Lisa's skeleton
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
[6/2/2009 11:50:14 PM] Lisa updated model Lisa's skeleton
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.

[6/2/2009 5:38:10 PM] yuritch added model yuritch's corvette
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 5:38:24 PM] yuritch added model yuritch's cruiser
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 5:38:37 PM] yuritch added model yuritch's shipyard
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 7:30:14 PM] Lisa added model Lisa's windy
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 8:39:45 PM] yuritch added model yuritch's gunboat
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 8:39:58 PM] yuritch added model yuritch's patrol_boat
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/2/2009 9:03:40 PM] yuritch added model yuritch's con_ship
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Daily news 6/3/2009 12:00:00 AM

[6/3/2009 12:00:14 AM] Lisa updated model Lisa's skeleton

[6/3/2009 9:35:15 AM] PressureLine added model PressureLine's hind
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 9:45:14 AM] PressureLine updated model PressureLine's hind
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z

[6/3/2009 2:10:06 PM] Bumblebee added model Bumblebee's Sumothing
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 2:15:14 PM] Bumblebee updated model Bumblebee's Sumothing

[6/3/2009 2:19:42 PM] Bumblebee updated model Bumblebee's Pyro
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

[6/3/2009 2:19:56 PM] Bumblebee updated model Bumblebee's Zeus
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

[6/3/2009 2:33:36 PM] Bumblebee added model Bumblebee's Turtlebot
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

[6/3/2009 5:45:14 PM] Lisa added model Lisa's MissTow
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm
maackey: Added another robot wip, changed some other minor stuff
admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added
(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message
3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 10:40:16 PM] Lisa updated model Lisa's MissTow
admin: NewUser