Spring RTS Engine

This thread contains news about model changes in ModelBase - posts once per day if something happens.

For general discussion about the system go here

advradar by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's advradar
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
apollo by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's apollo
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
can by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's can
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
mbot by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's mbot
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
misc by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's misc
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
plane by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's plane
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
radar by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's radar
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
spider by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's spider
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
storm by maackey
[5/7/2009 3:13:39 AM] maackey updated model maackey's storm
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.

Albatross by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Albatross
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
bellbutt by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's bellbutt
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Brawler by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Brawler
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
CylinderBot by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's CylinderBot
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
HLT by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's HLT
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Lotus by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Lotus
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Marshmellow by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Marshmellow
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Missiletower by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Missiletower
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
panther by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's panther
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Rapier by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Rapier
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Zeus by MidKnight
[5/8/2009 10:59:50 PM] MidKnight added model MidKnight's Zeus
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

mc2_uller by PressureLine
[5/9/2009 2:02:49 AM] PressureLine added model PressureLine's mc2_uller
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 2:25:47 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
[5/9/2009 2:31:10 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:23 AM] PressureLine updated model PressureLine's mc2_uller
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] PressureLine updated model PressureLine's mc2_uller
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
advradar by maackey
[5/9/2009 2:26:35 AM] maackey updated model maackey's advradar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's advradar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:20 AM] maackey updated model maackey's advradar
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's advradar
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
apollo by maackey
[5/9/2009 2:26:36 AM] maackey updated model maackey's apollo
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's apollo
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:20 AM] maackey updated model maackey's apollo
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's apollo
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
can by maackey
[5/9/2009 2:26:36 AM] maackey updated model maackey's can
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's can
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's can
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's can
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
mbot by maackey
[5/9/2009 2:26:36 AM] maackey updated model maackey's mbot
[5/9/2009 2:31:10 AM] maackey updated model maackey's mbot
[5/9/2009 9:31:21 AM] maackey updated model maackey's mbot
[5/9/2009 12:06:41 PM] maackey updated model maackey's mbot
misc by maackey
[5/9/2009 2:26:36 AM] maackey updated model maackey's misc
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's misc
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's misc
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's misc
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
plane by maackey
[5/9/2009 2:26:36 AM] maackey updated model maackey's plane
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's plane
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's plane
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's plane
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
radar by maackey
[5/9/2009 2:26:37 AM] maackey updated model maackey's radar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's radar
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's radar
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's radar
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
spider by maackey
[5/9/2009 2:26:37 AM] maackey updated model maackey's spider
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
[5/9/2009 2:31:10 AM] maackey updated model maackey's spider
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 9:31:21 AM] maackey updated model maackey's spider
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
[5/9/2009 12:06:41 PM] maackey updated model maackey's spider
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
storm by maackey
[5/9/2009 2:26:37 AM] maackey updated model maackey's storm
[5/9/2009 2:31:10 AM] maackey updated model maackey's storm
[5/9/2009 9:31:22 AM] maackey updated model maackey's storm
[5/9/2009 12:06:41 PM] maackey updated model maackey's storm
Albatross by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Albatross
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:54 AM] MidKnight updated model MidKnight's Albatross
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Albatross
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
bellbutt by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's bellbutt
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:54 AM] MidKnight updated model MidKnight's bellbutt
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's bellbutt
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Brawler by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Brawler
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's Brawler
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Brawler
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
CylinderBot by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's CylinderBot
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's CylinderBot
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's CylinderBot
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
HLT by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's HLT
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's HLT
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's HLT
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Lotus by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Lotus
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:55 AM] MidKnight updated model MidKnight's Lotus
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Lotus
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Marshmellow by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Marshmellow
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Marshmellow
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Marshmellow
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Missiletower by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Missiletower
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Missiletower
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Missiletower
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
panther by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's panther
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's panther
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's panther
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Rapier by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Rapier
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Rapier
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Rapier
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
Zeus by MidKnight
[5/9/2009 2:31:10 AM] MidKnight updated model MidKnight's Zeus
PressureLine: Added a file remotely
PressureLine: Removed file/folder
[5/9/2009 10:27:56 AM] MidKnight updated model MidKnight's Zeus
[5/9/2009 12:06:41 PM] MidKnight updated model MidKnight's Zeus
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
mc2_aerospotter by PressureLine
[5/9/2009 4:21:24 AM] PressureLine added model PressureLine's mc2_aerospotter
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 4:25:41 AM] PressureLine updated model PressureLine's mc2_aerospotter
PressureLine: Added a folder remotely
[5/9/2009 9:31:23 AM] PressureLine updated model PressureLine's mc2_aerospotter
[5/9/2009 12:06:41 PM] PressureLine updated model PressureLine's mc2_aerospotter
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
armhawk2 by KingRaptor
[5/9/2009 12:06:40 PM] KingRaptor added model KingRaptor's armhawk2
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's armhawk2
KingRaptor: Removed some wonky Cavedogisms from my scripts.
ichthyosaur by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's ichthyosaur
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 12:16:55 PM] KingRaptor updated model KingRaptor's ichthyosaur
KingRaptor: Ichthyosaur icon
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's ichthyosaur
KingRaptor: Removed some wonky Cavedogisms from my scripts.
mantisshrimp by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's mantisshrimp
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
peeper by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's peeper
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's peeper
KingRaptor: Removed some wonky Cavedogisms from my scripts.
shadow by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's shadow
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's shadow
KingRaptor: Removed some wonky Cavedogisms from my scripts.
sharpshooter by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's sharpshooter
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
siren by KingRaptor
[5/9/2009 12:06:41 PM] KingRaptor added model KingRaptor's siren
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/9/2009 3:40:39 PM] KingRaptor updated model KingRaptor's siren
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

corevamp models by 3dmodeler
[5/10/2009 8:00:15 PM] 3dmodeler added model 3dmodeler's corevamp models
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

angletank by PressureLine
[5/11/2009 6:19:12 AM] PressureLine added model PressureLine's angletank
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

Pyro by Bumblebee
[5/12/2009 2:17:57 AM] Bumblebee added model Bumblebee's Pyro
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Zeus by Bumblebee
[5/12/2009 2:17:57 AM] Bumblebee added model Bumblebee's Zeus
Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
can by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's can
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
mbot by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's mbot
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

misc by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's misc
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
plane by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's plane
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
radar by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's radar
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
storm by maackey
[5/12/2009 3:19:01 AM] maackey updated model maackey's storm
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

corevamp models by 3dmodeler
[5/12/2009 3:40:00 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
[5/12/2009 3:50:26 AM] 3dmodeler updated model 3dmodeler's corevamp models
[5/12/2009 4:41:57 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
landfactory by PressureLine
[5/12/2009 5:50:31 AM] PressureLine added model PressureLine's landfactory
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/12/2009 7:54:57 AM] PressureLine updated model PressureLine's landfactory
PressureLine: Removed file/folder

corevamp models by 3dmodeler
[5/13/2009 2:53:13 AM] 3dmodeler updated model 3dmodeler's corevamp models
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
armored_car by PressureLine
[5/13/2009 12:57:30 PM] PressureLine added model PressureLine's armored_car
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGBuggy by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGBuggy
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGECM by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGECM
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGHeavyTank by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGHeavyTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGHeli by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGHeli
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGInfantryTransporter by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGInfantryTransporter
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGLRRA by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGLRRA
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGMediumTank by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGMediumTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
DGMissileTank by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's DGMissileTank
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
NGViper by LordMuffe
[5/13/2009 2:05:55 PM] LordMuffe added model LordMuffe's NGViper
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
FIDO by Daan
[5/13/2009 9:34:01 PM] Daan added model Daan's FIDO
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/13/2009 9:49:13 PM] Daan updated model Daan's FIDO
VITO by Daan
[5/13/2009 9:49:13 PM] Daan added model Daan's VITO
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

bellbutt by MidKnight
[5/14/2009 4:20:20 AM] MidKnight updated model MidKnight's bellbutt
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon

contruck by PressureLine
[5/15/2009 2:07:02 AM] PressureLine added model PressureLine's contruck
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/15/2009 2:10:58 AM] PressureLine updated model PressureLine's contruck
PressureLine: Removed extra screenshot from contruck folder.
rapier-WIP by scifi
[5/15/2009 8:39:00 PM] scifi added model scifi's rapier-WIP
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

hawnk-WIP by scifi
[5/16/2009 10:28:06 AM] scifi added model scifi's hawnk-WIP
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 4:51:57 PM] scifi updated model scifi's hawnk-WIP
FIDO by Daan
[5/16/2009 2:26:14 PM] Daan updated model Daan's FIDO
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
Mark4 by Daan
[5/16/2009 2:26:14 PM] Daan added model Daan's Mark4
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
Springraces by Daan
[5/16/2009 2:26:14 PM] Daan added model Daan's Springraces
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 2:41:55 PM] Daan updated model Daan's Springraces
Urban assault by Daan
[5/16/2009 2:26:14 PM] Daan added model Daan's Urban assault
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/16/2009 2:41:55 PM] Daan updated model Daan's Urban assault
VITO by Daan
[5/16/2009 2:26:14 PM] Daan updated model Daan's VITO
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
rapier-WIP by scifi
[5/16/2009 4:51:57 PM] scifi updated model scifi's rapier-WIP

scoutcar by PressureLine
[5/17/2009 6:36:55 AM] PressureLine added model PressureLine's scoutcar
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
selene by KingRaptor
[5/17/2009 7:06:25 AM] KingRaptor added model KingRaptor's selene
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

attackcar by PressureLine
[5/21/2009 6:19:30 AM] PressureLine added model PressureLine's attackcar
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

heavy by maackey
[5/28/2009 9:13:42 PM] maackey added model maackey's heavy
maackey: Added another robot wip, changed some other minor stuff

[5/28/2009 9:33:46 PM] maackey updated model maackey's heavy
maackey: oops, forgot icons for both the heavy and the storm

misc by maackey
[5/28/2009 9:13:42 PM] maackey updated model maackey's misc
maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
plane by maackey
[5/28/2009 9:13:42 PM] maackey updated model maackey's plane
maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
storm by maackey
[5/28/2009 9:13:42 PM] maackey updated model maackey's storm
maackey: Added another robot wip, changed some other minor stuff

[5/28/2009 9:33:46 PM] maackey updated model maackey's storm
maackey: oops, forgot icons for both the heavy and the storm

can by maackey
[5/29/2009 8:00:14 AM] maackey updated model maackey's can
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
heavy by maackey
[5/29/2009 8:00:14 AM] maackey updated model maackey's heavy
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
storm by maackey
[5/29/2009 8:00:14 AM] maackey updated model maackey's storm
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
NGflafreg by LordMuffe
[5/29/2009 10:16:07 PM] LordMuffe added model LordMuffe's NGflafreg
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

trifighter by PressureLine
[5/30/2009 12:54:36 PM] PressureLine added model PressureLine's trifighter
PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
heavy by maackey
[5/30/2009 7:00:15 PM] maackey updated model maackey's heavy
maackey: thud

mta by Lisa
[5/31/2009 3:53:45 AM] Lisa added model Lisa's mta
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[5/31/2009 4:15:08 AM] Lisa updated model Lisa's mta

skeleton by Lisa
[6/1/2009 8:00:14 AM] Lisa added model Lisa's skeleton
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/1/2009 9:00:13 AM] Lisa updated model Lisa's skeleton
hammerhead by PressureLine
[6/1/2009 1:29:18 PM] PressureLine added model PressureLine's hammerhead
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

skeleton by Lisa
[6/2/2009 4:00:14 AM] Lisa updated model Lisa's skeleton
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
[6/2/2009 5:00:13 AM] Lisa updated model Lisa's skeleton
[6/2/2009 8:00:14 AM] Lisa updated model Lisa's skeleton
[6/2/2009 5:47:37 PM] Lisa updated model Lisa's skeleton
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
[6/2/2009 11:50:14 PM] Lisa updated model Lisa's skeleton
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
corvette by yuritch
[6/2/2009 5:38:10 PM] yuritch added model yuritch's corvette
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
cruiser by yuritch
[6/2/2009 5:38:24 PM] yuritch added model yuritch's cruiser
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
shipyard by yuritch
[6/2/2009 5:38:37 PM] yuritch added model yuritch's shipyard
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
windy by Lisa
[6/2/2009 7:30:14 PM] Lisa added model Lisa's windy
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
gunboat by yuritch
[6/2/2009 8:39:45 PM] yuritch added model yuritch's gunboat
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
patrol_boat by yuritch
[6/2/2009 8:39:58 PM] yuritch added model yuritch's patrol_boat
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
con_ship by yuritch
[6/2/2009 9:03:40 PM] yuritch added model yuritch's con_ship
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee

skeleton by Lisa
[6/3/2009 12:00:14 AM] Lisa updated model Lisa's skeleton
hind by PressureLine
[6/3/2009 9:35:15 AM] PressureLine added model PressureLine's hind
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 9:45:14 AM] PressureLine updated model PressureLine's hind
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
Sumothing by Bumblebee
[6/3/2009 2:10:06 PM] Bumblebee added model Bumblebee's Sumothing
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 2:15:14 PM] Bumblebee updated model Bumblebee's Sumothing
Pyro by Bumblebee
[6/3/2009 2:19:42 PM] Bumblebee updated model Bumblebee's Pyro
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Zeus by Bumblebee
[6/3/2009 2:19:56 PM] Bumblebee updated model Bumblebee's Zeus
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Turtlebot by Bumblebee
[6/3/2009 2:33:36 PM] Bumblebee added model Bumblebee's Turtlebot
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
MissTow by Lisa
[6/3/2009 5:45:14 PM] Lisa added model Lisa's MissTow
PressureLine: Uploaded hind_prop_settings.txt
PressureLine: Uploaded gfx_props_PL.7z
PressureLine: Uploaded Hind gunship model & files
admin: NewUser
yuritch: Construction ship model + script
yuritch: 2 new models - patrol boat and gunboat.
yuritch: 3 models (shipyard, corvette, cruiser) + scripts for them. 3DO solid-colored (not really textured).
admin: NewUser
PressureLine: Uploaded new model & related files - Hammerhead Fighter - PL
admin: lups screenshot test
admin: another test
admin: testing
admin: added screenshot with lups jets
maackey: thud

PressureLine: Uploaded 'trifighter' model, textures and other files - PL
maackey: updates to the heavy bot, possibly newer versions of some stuff to the jack and storm
maackey: oops, forgot icons for both the heavy and the storm

maackey: Added another robot wip, changed some other minor stuff

admin: NewUser
PressureLine: Added attackcar model and files - PL
admin: NewUser
admin: NewUser
KingRaptor: Added Selene, potential replacement for CA Nova specops. Still at the pre-UV stage.
PressureLine: Added scoutcar model & files - PL
admin: NewUser
PressureLine: Removed extra screenshot from contruck folder.
PressureLine: Uploaded contruck model & files.
MidKnight: screenshot!
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Uploading corrected model with red lines for front detail
3dmodeler: Deleting due to model not matching exactly what the screen shots show--model had round "eyes" screen shots had flat red lines. Model will now have red lines like screen shots.
admin: NewUser
admin: NewUser
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Updated texture1, screenshots and icon.
PressureLine: Removed file/folder
PressureLine: Removed file/folder
PressureLine: Added a folder remotely
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: stealthplane 1 screenshots added

(stealthplane1 & 2 are alternative models--likely too high poly count on version 1--but if it's the preferred item, I think I can fix that. Please comment. Thanks.
3dmodeler: Stealthplane2 multiview rendering added
maackey: Cleaned up some uneeded files, added screenshots and icons to some.

Bumblebee: Zeus model
Bumblebee: Pyro model.
Bumblebee: Zeus model.
admin: NewUser
admin: NewUser
PressureLine: Added a folder remotely
3dmodeler: Better polycount--possible corevamp CA replacement model--needs scripting, texturing, etc. Bear with me--I'm learning everything other than modeling
3dmodeler: candidate 1--likely too high polycount--put in for discussion regardless
3dmodeler: no additional message

3dmodeler: Two potential candidates for discussion/review as corevamp replacement in CA
admin: NewUser
admin: NewUser
KingRaptor: Removed some wonky Cavedogisms from my scripts.
KingRaptor: Ichthyosaur icon
KingRaptor: Some of my models. Screenshots when I feel like it (which is never).
admin: NewUser
PressureLine: Added a folder remotely
PressureLine: Added a folder remotely
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Added a file remotely
PressureLine: Removed file/folder
PressureLine: Moved remotely
PressureLine: Moved remotely
PressureLine: Created folder remotely
PressureLine: Added a folder remotely
PressureLine: Removed file/folder
PressureLine: Created folder remotely
admin: NewUser
admin: NewUser
MidKnight: Committing my models.
admin: removed test folders
admin: testing timer
admin: screenshot test
maackey: a couple screenshots and an icon for testing
maackey: Some of this stuff (specifically my older mbot and test plane) are quite messy and may have some files not needed. I'll try to go through and clean them up later.
admin: NewUser
admin: NewUser
admin: NewUser
admin: current users
admin: tee
[6/3/2009 10:40:16 PM] Lisa updated model Lisa's MissTow
admin: NewUser