Page 1 of 1
Sound Volume
Posted: 14 Jan 2009, 17:36
by MelTraX
To get your unit sounds back to full volume until the next Spring release, open "C:\Documents and Settings\<user>\Local Settings\Application Data\springsettings.cfg" and set "UnitReplyVolume" to 100 (as well as UnitReplySoundVolume just to be sure
)..
Re: Sound Volume
Posted: 14 Jan 2009, 18:14
by imbaczek
or /unitreplyvolume ingame (type /unit<TAB>); set to 1 for max
Re: Sound Volume
Posted: 14 Jan 2009, 18:16
by Auswaschbar
MelTraX wrote:To get your unit sounds back to full volume until the next Spring release, open "C:\Documents and Settings\<user>\Local Settings\Application Data\springsettings.cfg" and set "UnitReplyVolume" to 100 (as well as UnitReplySoundVolume just to be sure
)..
You can set all config values from ingame:
Re: Sound Volume
Posted: 14 Jan 2009, 21:28
by koshi
you can also use this:
http://springlobby.info/installer/springsettings.exe (replace current with that and adjust reply volume)
Re: Sound Volume
Posted: 15 Jan 2009, 11:12
by Soul
I dont see why anyone would ever want unit reply to 100.
Set it to something below 10, or you go insane after spamming some flashes/gators
Re: Sound Volume
Posted: 15 Jan 2009, 12:28
by jK
Soul wrote:I dont see why anyone would ever want unit reply to 100.
Set it to something below 10, or you go insane after spamming some flashes/gators
scaling has changed
Re: Sound Volume
Posted: 15 Jan 2009, 13:15
by koshi
what the hell? i specifically asked if range and default setting could remain the same
Re: Sound Volume
Posted: 15 Jan 2009, 13:39
by jK
and I said unitreplies were loaded with a default volume of 5.0f before and now with 1.0f.
so the old default of 20 should now be 100.
Re: Sound Volume
Posted: 15 Jan 2009, 20:01
by koshi
all i took from that convo was:
Code: Select all
Jan 13 00:51:05 <_koshi_> Auswaschbar: tell me what to do please, too tired for thinking
...
Jan 13 00:51:46 <MelBot> <Auswaschbar> UnitReplySoundVolume -> UnitReplyVolume
...
Jan 13 00:52:00 <_koshi_> that's all? default 20 ok?
Jan 13 00:52:22 <MelBot> <Auswaschbar> ok
Re: Sound Volume
Posted: 15 Jan 2009, 20:07
by jK
you cut my stuff :p
(and me was the one who wrote those 2 patches)
Re: Sound Volume
Posted: 15 Jan 2009, 20:18
by koshi
I cut your stuff because i didn't get it then, see first line of the paste
Anyways, if I put default at 100 I'm at the end of current range, should I just scale that by 5 too?
I'm not exactly keen on performing any internal scaling (ie representing 0-100 to user and write sth else)
Re: Sound Volume
Posted: 15 Jan 2009, 21:58
by jK
500% seems a bit much. IMO 150% seems for reasonable.
Re: Sound Volume
Posted: 16 Jan 2009, 13:14
by Forboding Angel
why the change? Just to make it more "Uniform" across sound settings?
Also... doesn't the installer dl springsettings from the site each time? SO if I run the installer now, wouldn't it grab the absolute latest?
Re: Sound Volume
Posted: 16 Jan 2009, 13:35
by koshi
Yes it will. The "Reply volume" slider now controls the value of "UnitReplyVolume" instead of "UnitReplySoundVolume", max is 150, default 100 (read; 150%, 100% )
As for the why of change, jk better answer that, I've been informed only after it was already done and producing the fubar in current release.
edit: remember this volume is relative to global sound volume